Feather Edge Boards
- Product length
- Size
Feather Edge Boards
Feather edge boards are the main part in closeboard fencing. Nailed vertically to arris rails, they give your fence strength, privacy, and a clean, traditional look.
We stock a full range, from 3ft to 8ft, pressure treated and ready to install. All boards are 100mm wide, 22mm thick at the base, and tapered for easy overlapping.
They are sold individually, so you can buy what you need. Not sure how many you need? No problem. Give us a call, and we’ll work out out for you.
What Feather Edge Boards Are For
These boards are used to build closeboard fences. The kind thats made board by board instead of using pre-built panels. It takes a bit more work, but the result is worth it: stronger, sturdier, and easier to repair if something gets damaged.
You fix the boards vertically onto arris rails, which are horizontal supports fitted between fence posts. The boards overlap slightly, which stops gaps forming and helps rainwater run off properly.
This setup is used in gardens, driveways and commercial spaces. Basically, anywhere you need a strong boundary that doesn’t blow over at the first gust.
Sizes and Finishes
- 3ft / 0.9m
- 4ft / 1.2m
- 5ft / 1.5m
- 5ft 6in / 1.56m
- 6ft / 1.8m
- 7ft / 2.1m
- 8ft / 2.4m
All boards are 100mm wide and 22mm thick at the base, then tapered to a thinner edge. That taper is where the name feather edge comes from.
You’ll see brown and green boards. Both are pressure-treated to protect against rot. The colour is just cosmetic. If you’re matching to an existing fence, check what you’ve already got. If it's a new run, either works; just pick the one you like the look of.
Brown looks tidy and ready to go. Perfect if you want a polished finish straight away.
Green is a bit paler at first but fades into a silver-grey over time. It blends in well with greenery and looks more natural once it settles.
How many do you need?
This is probably the most common question we get asked. Here’s the quick way to work it out.
Each board covers 75mm once overlapped.
Fence length (in mm) ÷ 75 = number of boards you need.
For example, a 10-metre run = 10,000mm ÷ 75 = about 134 boards.
Add in a few for cuts or mistakes.
If you’re building a full run, you will also need:
- 3 arris rails per bay (for fences over 4ft)
- Fence posts
- Gravel boards (to protect the base)
- Galvanised nails (we stock these as well)
Some tips for installing feather edge boards
- Start at one end and work across
- Overlap each board by 25mm
- Use 40mm galvanised nails (two per board)
- Don’t nail through two boards at once. Fix each one separately.
- Leave a gap at the bottom to stop water damage. Gravel boards will also help wit this
- Use a spiriti level every so often to check you’re still vertical. Wobbly fences don't age well.
Why choose feather edge over fence panels?
It takes more effort, but it's worth it. It's also more customisable.
- Stronger than panels, especially in exposed areas
- Made to fit - great for odd shapes, slopes, and awkward gaps
- Easy to repair - swap out one board instead of a whole panel
- Looks clean - neat, uniform finish once it's all in place.
What else might you need?
You’ll need more than just boards. Here are some of the other things you might need. Don’t forget your hammer, saw (if you are trimming the boards), gloves, and a spirit level.
- Arris rails - the horizontal supports the boards ge nailed to
- Fence posts - wooden or concrete
- Brackets - for fitting rails to posts
- Nails - 40mm galvanised is the standard
- Gravel boards - stop the bottom boards from soaking up moisture
- Post caps - optional, but a nice finishing touch.
Contact Us
Got any questions? Or need advice on what feather edge you need? Don’t worry - we’re here to help. We know fencing inside out.
Chat With Our Team - We’re real people who actually enjoy talking about fencing (yes, really). If you need recommendations, installation tips, or help with an order, then reach out, and we will help.
Delivery Options - We offer fast, reliable delivery straight to your door, We use our own fleet of truck to assure you product gets to you in perfect condition.
Visit us - Based in Northfleet, Kent and Catford in London we’re ideally placed for deliveries across London Kent, Essex and beyond.
Call Us
- Kent - 01322 787 312
- London - 0208 698 4064
Email us - Get in touch via our website contact form.
WhatsApp us - We are only a text message away.
No matter what you need, we’ll make sure you get the right products at the right price.
- FAQ
- DELIVERY AREA
- What are feather edge boards?
Feather edge boards are use used to make fence panels and also used to build feather edge fencing bays.
What wood are your feather edge boards?We only use spruce feather edge boards from Ireland. Spruce is the best wood to use as it takes the treatment well and gives a consistent colour.
What size featheredge boards do you have?We stock 3ft featheredge up to 8ft featheredge
How wide are your feather edge boards?Our feather edge are100mm wide. This is the best size to use as it is less to warping than wider feather edge boards.Do you nail through both featheredge boards ?It is recommend that each featheredge board is fixed once and not through both boards. Some suppliers advise using two nails per board, but this does not allow for shrinkage of the board and can result in splitting.
What colour are your feather edge boards?We do our feather edge in 2 colours, Natural green and brownCan I Collect?Yes we have a warehouse and showroom in Northfleet In Kent and also in Catford London.
