Tel 01322-787312
Drive in fence post spikes are a quick and easy way to erect fencing and garden posts as they require no digging or concreting into place, saving time and money. These metal fence post spikes feature a 4 fin steel spike to ensure a solid, permanent, wind resistant fit. The bolt secure version features 2 x 8mm carriage bolts that tighten and clamp the post firmly into the post holder section to prevent any post movement as well as allowing for over/under sized post tolerance. The bolt secure system also allows for removal of the post at a later stage if required. The quick fit version features inverted fins inside the post holder section that will hold the post in a vice like grip. The Meta posts system prevents against post rot and decay as it will hold the base of the post above ground level. These post spikes are available in a red oxide powder coat to blend in with the fencing and provides medium rust protection or hot dip galvanised for maximum rust protection. Both options can be over painted if you wish. For 4ft fencing use a 600mm fencing spike, for 6ft fencing use the 750mm fencing spikes. For a guide on how to install post spikes see our guide here
Bolt down fence post supports are a quick and easy way to erect fencing and garden posts as they require no digging or concreting into place, saving time and money. This metal fence post support is designed to be fixed down onto an existing concrete base or wall and are perfect for patio fencing, decking, pergolas or car ports. The post base bolt secure version features 2 x 8mm carriage bolts that tighten and clamp the post firmly into the post holder section to prevent any post movement as well as allowing for over/under sized post tolerance. The bolt system also allows for removal of the post at a later stage if required. This system prevents against post rot and decay as it will hold the base of the post above ground level. Available in a red oxide powder coat to blend in with fencing whilst also providing a medium rust protection. Use hot dip galvanised for maximum rust protection. Both options can be over painted if you wish. If you were looking for a concrete fence post support you will need a concrete fence post repair spur.
Concrete in fence post supports are designed to be set into concrete when ground conditions won't allow for a drive in spike or when the post is to be fitted in a hard standing area. The support has 4 fins at the bottom to hold the support firmly into the post holder section to prevent any post movement as well as allowing for over/under sized post tolerance. The bolt system also allows for removal of the post at a later stage if required. Available in a red oxide powder coat to blend in with fencing whilst also providing a medium rust protection and also galvanised. Use hot dip galvanised for maximum rust protection. Both options can be painted over.
G&G Metpost are masters in clever fencing technology. Unsatisfied with replacing entire fence posts because they’re a slightly eroded or throwing away timbers when they’ve been cut a little too short. Metpost are set out to make erecting and repairing your fence a breeze. We can deliver to England, Wales and parts of Scotland. We do recommend if you can get a fence post in the ground 2 ft with post mix this will be better for you