Classic Multi-Purpose Screws | PZ | Double Countersunk | Stainless Steel | 6.0mm x 130mm

All the features and superior performance of the Classic Multi-Purpose Screw manufactured from A2 Stainless Steel. Ideal where ultimate corrosion resistance is required when fixing to softwoods, hardwood (pre-drilled), chipboard, MDF and plastic. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak. NOTE: Sharp point only.

• Double countersunk reduces the likelihood of head shear and assists completion of countersinking

• 40° deep single thread to provide a secure fixing with high pull-out resistance

• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length

• Size (mm) | 6.0mm x 130mm
• Size (imp.) | 12 x 5 1/8
• Driver Bit Size | PZ3
• Thread Ø (mm) | 6.0mm
  
• Thread L (mm) | 70mm
• Finish | Stainless Steel
  
• Recess Type | TX Drive
  
• Head Type | Double Countersunk
• Thread Type | Single Coarse 40°
• Point Type | 25° Sharp
• Material | Austenitic Stainless Steel (A2-304)
• Salt Spray Resistance (Hrs) Tested to BS EN 9227 | 1008
  
• Corrosion Rating (1-5) | 4 - Urban & industrial areas with a moderate salt atmosphere

• Substrates | Hardwood, Softwood, Chipboard, MDF, Plastic, Thin Sheet Metal