Skip to main content

50% Off Delivery On Orders Over £500 25% Over £350

Kent - Tel 01322-787312
London - Tel 020-8698-4064

Chat On WhatsApp

Arris Rail

Filters
Type
Product length

Arris Rails

Arris rails are the support beams behind feather-edge fencing. They run horizontally between your posts and give your fence the strength to stay upright, which is useful when the wind picks up. You usually need two or three per section, depending on the height of your fence.

We stock flat-end and mortised arris rails in 2.4m and 3m lengths, pressure treated for long life. Match them with brackets or morticed posts, and you’re good to go.

If you are not sure how many you need, give us a ring. We’ll help you figure it all out.

Set Sort Direction

12 Item(s)

Set Sort Direction

12 Item(s)

What Types of Arris Rail Do You Need?


There are two types of arris rail. Flat-end and morticed.

Flat end rails are the simple option. You fix them to your posts using brackets, easy to fit, easy to replace. If you’re repairing a fence or adding a new section, these do the job without fuss.

Mortified rails are shaped to slot into morticed fence posts. It gives a cleaner look and stronger hold, especially over long runs. Ideal if you want a tidy finish or you’re building from scratch.

Just make sure you match the rail type to the post type. Mortified rails won’t work with standard flat-end posts.

What sizes are available?

Most arris rails come in lengths of 2.4m (8ft) or 3m (10ft). That's enough to span standard fence bays. You can always cut them down if needed. Just remember to treat the end cuts to protect the timber.

They’re pressure-treated to fight off rot and insects. Available in green or brown finishes. Green weathers in over time. Brown looks a bit more traditional straight out of the gate.

How Many Rails Do You Need?

Here's a simple rule of thumb.

  • Fences up to 4ft high - 2 rails per bay
  • 5ft to 6ft fences - 3 rails per bay
  • Over 6ft or windy areas - 3 to 4 rails per bay
Better to have one extra than find yourself a rail short halfway through.

Don’t Forget the Extras

If you’re using flat-end arris rails, you’ll need brackets to hold them in place. These come in different sizes. 225mm and 300mm are the most common.

If you’re fitting into concrete morticed posts, grab a mortice adapter for a snug fit.

Some other bits worth picking up are:

  • Galvanised screws - rust-resistant and fence-friendly
  • Post caps - keep rain out of the post tops
  • Wood preserver - for any freshly cut ends

These little things keep your fence stronger for longer.

Installation tips

  • Use a spirit level when fixing rails. Nobody wants a wonky fence
  • Pre-drill your brackets to stop the wood from splitting
  • Treat all cuts to stop rot creeping in
  • If you’re replacing a single rail, support the boards above it while you work

Why are Arris rails cut the way they are

The angled shape isn’t just for show. It helps water run off instead of sitting on the timber. Less water means less rot and a longer timespan.

It also adds strength. The triangle shape helps brace the fence, especially in bad weather. It’s a small detail that makes a big difference once the fence is up and facing wind, rain, and the occasional football.

Can you mix morticed and flat-end rails?

The short answer is, not really.

They serve the same purpose but fix in different ways. Morticed rails need matching morticed posts. Flat-end rails need brackets. Mixing the two usually leads to a wobbly setup and a lot of swearing.

Pick one system and stick with it. It will look better and hold up longer.

Why buy your Arris rails from us

We don’t just stock the parts. We know what works.

If you’re doing a quick fix or building a whole new fence, we’ve got the timber, brackets, and advice to get it done. Our rails are pressure-treated and built to last. We keep plenty in stock so that you won’t wait weeks for a delivery.

Contact Us

Got any questions?
 Or need advice on what Arris Rails you need? Don’t worry - we’re here to help. We know fencing inside out. feather edge, mortice fence posts, gravel boards, and everything else fence-related.

Chat With Our Team - We’re real people who actually enjoy talking about fencing (yes, really). If you need recommendations, installation tips, or help with an order, then reach out, and we will help.

Delivery Options - We offer fast, reliable delivery straight to your door, We use our own fleet of truck to assure you product gets to you in perfect condition.

Visit us - Based in Northfleet, Kent and Catford in London we’re ideally placed for deliveries across London Kent, Essex and beyond.

Call Us 

  • Kent - 01322 787 312
  • London - 0208 698 4064

Email us - Get in touch via our website contact form.

WhatsApp us  - We are only a text message away.

No matter what you need, we’ll make sure you get the right products at the right price.

  • FAQ
  • DELIVERY AREA
  • What is a arris rail?

    An arris rail is the part of feather edge fencing that is used at the back. You can get morticed arris rail or flat end arris rail.

    Do I need brackets?

    If you are install a new fence with morticed fence posts you would purchase the morticed arris rails that would not need any brackets. If the posts are all ready installed you would purchase the flat end arris rails and add brackets to them.

    How many arris rail will I need?

    You will need 3 arris rails per fencing bay for from 5ft to 6ft any size under that would be 2 rails per bay.

    Are you arris rails treated?

    Yes all our wood is fully pressure treated

    Can I Collect?

    Yes! Collections are welcome, we have a warehouse and showroom in Northfleet In Kent and also in Catford, London.