Free Delivery Over £750 Half Price Over £250
Square Horizontal Lattice Fence panels are 1800mm wide. They are smaller than a standard British fence panel so if you are changing your panels you will need fence packers to make them the same size.
You will not need to treat your fence panels bought from G&G as they are fully pressure treated but if you want to keep them looking fresh we recommend Barrentine Timber Protector to repel water, protect against UV damage and mould. The Barrentine Timber Protector offers good surface protection due to its wax content, but it's really only suitable for use on pre-treated timber.
Our Square Horizontal fence panels come fully pressure treated in natural (green).
Yes it can! Painting treated fencing wood will not only help you achieve your ideal aesthetic but also gives the wood an additional layer of protection, which is always good.
Most treated timber is still “wet” from the treatment and needs time for the chemicals in the wood to settle and dry. You will notice, the wood is heavy and will still feel damp to the touch. If primer or paint is added to it at this point, there is every likelihood that it will be rejected by the water-based chemicals that are still working their way through the wood.
It is important to allow the timber to dry out fully before attempting to add paint or primer. This can be a lengthy process and may even take up to a few weeks depending on where the wood is stored. If there is too much heat and direct sunlight, this can cause the treated timber to warp instead of dry out. Damp conditions can also prolong the drying-out period.
Yes! We have a warehouse and showroom in Northfleet In Kent.
Unit F6
Northfleet Industrial Estate
Gravesend
Kent
DA11 9SW