Field Gate Adjustable Hinge Set | 450mm | Hot Dipped Galvanised

Ideal for use on fieldgates and driveway gates that are to be hung on timber posts. The hinge set provides exceptional support to the gate as the top band wraps around the gate and are fixed with cup square bolts to firmly secure in place. The bottom fitting clamps around the heel of the gate and is adjustable to allow for easy gate alignment after fitting. This is particularly useful when hanging pairs of gates. ?Depending on the weight distribution of the gate, the top or bottom pin can be mounted upside down to prevent unwanted removal of the gate. TIMCO fixings included.

• Hook to bolt features a 9mm drilled hole for R clips or linch pins (not included) to be fitted to prevent the gate being lifted off
• Hooks to drive are barbed, preventing the gate from working loose

• To Suit Gate W (mm) | 1200mm x 2700mm
  
• Heel Clip Size L x W x D (mm) 86 x 50 x 32
  
• Hook to Drive Size (mm) 215 x 22
  
• Pin Ø (mm) | 19mm
  
• Pin Ø (inch) | 3/4
• Gate Eye Ø x L (mm) M19 x 250
  

• Hook to Bolt Ø x L (mm) M20 x 350mm

• Number of Screw Holes | 2
  
• Top Strap L (mm) | 450mm
  
• Top Strap L (inch) | 18in
• To Fit Carriage Bolt Ø (mm) | M10
• Material | Carbon Steel
  
• To Suit Gate T (mm) | 75mm